JOHNNY JOINT ROD END 2 INCH WELD ON 2 INCH X 0.4375 INCH BALL JOHNNY JOINT ROD END 2 INCH WELD ON 2 INCH X 0.4375 INCH BALL Currie CE 9110P 14 Johnny Joint Rod End Walmart.com Johnny Joint Rod End 2 1 2 Inch Weld On Chromoly Barrel 2.625 Inch X 0 Johnny Joint Rod End, 2 in., Narrow Forged, Long Shank, 1 in. 14 RH. RockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high density urethane bushings that encase the inner ball. The heat treated center balls are cross drilled for thru bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is designed to fit the axle side of the 2021 and up Bronco's rear control arms and feature a narrow 2 1 2 inch diameter joint body, fitted with a zerk fitting for greasing, 2. 3 inch of 1 1 4 inch 12 left hand threads on the shank, and a 70mm mounting width ball with a 16mm thru bolt hole. Finished in gold zinc plating.