JOHNNY JOINT ROD END 2 INCH WELD ON 2.180 INCH X 0.482 INCH BALL NARROW JOHNNY JOINT 2 INCH WELD ON 1.600 INCH X 0.480 INCH BALL Axial Ball And Socket Joint Cheap Sale www.oceanproperty.co.th RockJock Throtl 2021+ Bronco Johnny Joint 2 1 2in Narrow Forged 1 RJ Johnny Joint Rod End 2 1 2 Inch Weld On 2.440 Inch X 0.515 Inch Ball I. RockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high density urethane bushings that encase the inner ball. The heat treated center balls are cross drilled for thru bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1 2 Inch diameter, fitted with a zerk fitting for greasing, 2 1 4 Inch of 1 Inch 14 left hand threads on the shank, and a 2. 440 Inch mounting width ball with a . 515 Inch thru bolt hole. Finished in gold zinc plating. Details: Forged Johnny Joint 2 1 2 Inch 2. 440 Inch X 0. 515 Inch Ball 1 Inch 14 Left Hand Threaded Shank Externally Greased Each